Description
Boutonnière OEILLETS Siruba BH9820-2, Direct-drive Programmable Electronic.
| SPECIFICATION | BH-9820-00 | BH-9820-01 | BH-9820-02 |
|---|---|---|---|
| Needle thread trimmer | Long thread trim | Long thread trim | Short thread trim |
| Bobbin thread trimmer | None | Long thread trim | Short thread trim |
| Main applications | Suit-dress | Men’s clothing,casual clothing | Jeans trousers,trousers |
| Other applications | Men’s clothing, casual clothing, jeans trousers,trousers |
Suit-dress,jeans trousers,trousers | – |
| Function | Only trim the needle thread.The max. Length of button hole is 50mm; |
Trimming both needle thread and bobbin thread |
Trimming both needle thread and bobbin thread.No need second trim |
| Sewing shape |  |
 |
 |
| Sewing length | Round-head eyehole 8-50mm Straight button hole 5-50mm |
Round-head eyehole 8-42mm Straight button hole 5-42mm |
22-30mm* 14-22mm* 18-26mm* 26-34mm* 34-42mm* |
| Press foot length (standard) | 30mm | 30/26mm | |
| Length of hammer (standard) | 22mm | 24/20mm | |
| Length of hammer (accessory) | 30mm | 28/24mm | |
| Sewing speed | 1000-2500rpm | ||
| Needle code | 0.5-2.0mm | ||
| Zigzag sewing width | 1.5-5.0mm (In mechanical conditions, it is 4.0Mm wide at most and the zigzag sewing width is 5.0 At most.) |
||
| Zigzag sewing width (factory setting) | 2.5mm | 3mm | |
| Length of stream thread | 0-20mm | ||
| Height of work clamp | Standard height is 12mm (may reach 16mm at highest) | 16mm | |
| Start-off mode | Double pedal switch | ||
| Fabric feeding device | Intermittent cloth-sending of 3 pulse motors (x,y,θ) | ||
| Machine needle 4 | DOx558 Nm80 – Nm120 | ||
| Safe setting | If there are any problems, the inner setting with urgent stop function and driven by safe circuit will automatically stop the machine | ||
| Upper shaft motor | AC-servo motor 550W | ||
| Air pressure | Main regulator : 0.5Mpa;Hammer-pressure regulator : 0.4Mpa | ||
| Air consumption volume | 43.2 liter/minute (8 cycles/minute) | ||
| Power supply | Single phase 100V / 200V, Three phases 200V /220V/ 380V/ 400V, 400VA | ||
| Weight | Machine head: ~ 120kg / Operation board :~0.6kg / Control box:14.2-16.2kg | ||
Avis
Il n’y a pas encore d’avis.